Motorcycle Rear Shocks
We carry one or the largest ranges of motorcycle rear shocks for classics.
We have a wide range of Hagon and Girling rear shocks and suspension units available
Girling Suspension Units History
The well known oil filled Girling shocks were commonly used on most British motorcycles. They were later replaced by Gas Filled Shocks. The Girling factory was on King’s Road, Birmingham.
Burton Bike Bits carry some Genuine Girling Suspension Units and Springs.
Suspension Covers
Shocks looking a little tired? Why not replace the covers and make them look like new?
| Part Number | Description | Photo |
| P19/GIRLING | Suspension Cover Set for 10.9″ & 12.9″ Shocks |  |
| P20/GIRLING | Suspension Cover Set for 13.4″ Shocks |  |
Girling Replica Motorcycle Rear Shocks
11.4″ Girling Replicas
| Part Number | Description | Model/Year |
| 19-7417 | Shrouded Rear Shocks Non Adjustable 3/8″ Top Bush 1/2″ Bottom BushBuy Online | BSA Bantam D7/D10/D14 1958 on |
| Can Replace SC3/204 | Shrouded Rear Shocks Non Adjustable 3/8″ Top Bush 1/2″ Bottom Bush | Triumph Tiger T20 |
As Original 13.4″
| Part Number | Description | Model/Year |
| 68-4224 | Shrouded | A50/A65/’62 ’63 |
| 19-7418 | Shrouded | A50/A65/’64-’68 |
| 19-7438 | Chrome spring + Top Covers | A65L/S/1968 |
| 19-7440 | Chrome Spring only | A65F/1968 |
| 19-7448 | Chrome Spring only | A65/1969-70 |
11.9″ Girling Replica Motorcycle Rear Shocks
| Part Number | Description | Model/Year |
| GR64053946 | Covered in, complete with Chrome Springs (132lb) | Triumph 3TA/5TA/T100A 1959-67 |
| GR/650539116N | Covered in, complete with Genuine Girling Chrome Springs (64543764, 132lbs) | Royal Enfield Interceptor MK1 1964-66 |
| W49557A | Covered in, complete with Genuine Girling Chrome Springs (64543764, 132lbs) | Royal Enfield Interceptor MK1A/MK2 |
| W49558A | Chrome Spring, complete with Genuine Girling Chrome Springs (64543764, 132lbs) | Royal Enfield Interceptor MK1A, GT90 |
| 06-7865 NM24036 | Covered in, Shrouded(110lbs) | Norton Slimline Models 1960on (Dommie 88/99, 650SS, Atlas) |
| 60096 | Fully Shrouded, 3/8 ” Bushes (110lbs) | Ariel Heavy Weight (1952-59) |
| 60097 | Fully Shrouded, 3/8 ” Bushes (90lbs) | Francis Barnett/Greeves etc. |
Velocette Rear Shocks
| Part Number | Description | Model/Year | Photo |
| MAS33/4 | Woodhead Monroe 13.2″ Suspension Units | Velocette Swinging Arm Models |  |
| MAS33/6 | Girling Replica 13.2″ Suspension Units | Velocette Swinging Arm Models |  |
12.2″ Girling Replica Motorcycle Rear Shocks
p/n 02-4180, Fully shrouded with 110lbs spring rate, length 12.2″, complete with bottom alloy yoke & polished alloy collets.
Available for AJS, Matchless
12.9″ Shrouded Type Motorcycle Rear Shocks
Available for AJS, Matchless (1965 on, G3, G80, G12, G15)
Fitted with 110lb spring and 3/8″ bushes top and bottom.
12.9″ Shrouded Type Motorcycle Rear Shocks
Available for the following Models:
BSA – B31, B32, B33 , B44, A7, A10
Norton- 88, 99, Model 50, ES2, All Widelines Pre 1960
Triumph- Pre-Unit 6T, T120, TR6, Unit T100, T120
| Part Number | Description | Model/Year | Photo |
| 42-4461 | 12.9″ Shrouded Shocks | BSA A & B Models Rocket Goldstar/Goldstar |  |
Genuine Girling Suspension Springs
This Is Just A Small Selection Of Our Stock!
| Part Number | Models |
| GR9054/58 | James K7/ C / T / K12 / L25T /S Matchless G2 / Ariel BSA C15 / B40 |
| GR9054/59 | BSA CB / DBD / Ariel |
| GR64543626 | B50MX / TR5W |
| GR64545350 | A6501F ’71 |
| GR64543735 | A50 / A65 |
| GR64543764 | Yamaha XS1 / XS2 T100 ’60-68 |
| GR64541788 | RE250 |
Hagon Shocks
Hagon Suspension units feature Progressive action springs (except 30kg/cm & above), conventional stepped spring adjuster cam-ring. Double sealed nitrogen cell, Automatic compression & rebound damping control.
Supplied in complete pairs with adjusting spanner.
Guaranteed for 2 years.
Hagon Shocks History
Hagon Products was created in 1958 by ex-British Grasstrack Champion Alf Hagon. The company produced competition frames.
Hagon Shocks can be used to replace the original Girling Shocks and we carry the full Hagon Shocks Catalogue
Available – 11.4″, 11.9″, 12.4″, 12.9″, 13.4″ Chrome Open Spring Type
BSA- C15, B40, B25, B44, B50, A50, A65, A70
Norton- Dommie, Atlas, Commando’s
Royal Enfield – 250cc, 350cc, 500cc, 700cc, 750cc
Triumph- Late T20’s, 3TA, 5TA, T100, TR5T, T120, TR6, 6T, T140,TR7, T150,T160, X75
Shroud Set (Girling Type)
Shroud Set (Hagon Type)
Triumph Bonneville Shocks
Hagon Classic Shocks
Can be fitted to all Triumph Bonneville models (Note differences in US spec bikes and 2009/10)
Get the Classic look whilst improving ride and handling! 3 Way Adjustment. We can offer various styles, black open spring, chrome spring or shrouded black or chrome.
| Part # | Description | Model |
| 34008 | Classic Style Hagon Shock absorbers 340mm | Bonneville Models 2000 – 2008 |
| 32051 | Classic Style Hagon Shock absorbers 320mm | Bonneville Models 2000 – 2008 (USA Spec) |
| 33008 | Classic Style Hagon Shock absorbers 330mm | Bonneville Models 2009/10 |
Suspension Plungers
| Part Number | Description | Model/Year |
| 89-4041 89-4046 | Plunger Carrier Column c/w tube and bush and 67-4166 Top Plug | BSA A7/A10/B31 B32/B33/B34… |
| 89-4240 89-4241 89-4248 89-4249 | Plunger Cover Set | BSA B31/B32/B33/A7/A10/M20/M21 Plunger Models circa 1954-57 |